Wacker Neuson ET12 02 Скачать руководство пользователя страница 207

Страница: 207 / 286

BA ET18, 20, 24 en* 1.5 * et18_20_24w700.fm

7-29

Maintenance

Checking the water separator

Water separator

Empty the water separator if the red indicator ring

rises to position

Fuel filter

Empty the fuel filter if the fuel/water mixture rises to position

Emptying the water separator

WARNING

Explosion and fire hazard when handling fuel!

Can cause serious burns or death.

►

Bleed the fuel system only if the engine is cold.

►

Wear protective equipment.

►

Never perform work on the fuel system near open flames or sparks.

►

Do not smoke.

►

Keep the maintenance area clean.

Information

The fuel system can be bled automatically even if the engine is at
operating temperature

– see chapter “ Bleeding the fuel system” on page 7-28.

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Prepare a suitable container for collecting the fuel/water mixture.
3. Open the engine cover.
4. Turn ball-type cock

to the

OFF

mark.

➥

Fuel supply is interrupted.

5. Unscrew threaded ring

6. Collect the fuel/water mixture in a suitable container.
7. Screw threaded ring

back on again.

➥

The indicator ring is at the base of the water separator.

8. Turn ball-type cock

to the

mark.

➥

Fuel supply is open.

9. Close and lock the engine cover.

Fig. 255Water separator and fuel filter

Fig. 256Water separator

Off

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды