Wacker Neuson ET12 02 Скачать руководство пользователя страница 20

Страница: 20 / 286

2-4

BA ET18, 20, 24 en* 1.5 * Sicherheit_12072013.fm

2 Safety

2.4

Operation

Preparatory measures

• Operation is only allowed with correctly installed and intact protective

structures.

• Keep the machine clean. This reduces injury, accident and fire

hazards.

• Safely store objects you carry with you in the places provided for this

(for example in the storage compartment, drinks holder).

• Do not carry objects with you that protrude into the operator’s work

space. They can create another danger in case of an accident.

• Observe all safety, warning and information labels.
• Start and operate the machine only with the seat belt fastened and only

from the place provided for this.

• Check the condition and the fastening of the seat belt. Have malfunc-

tioning seat belts and mounting hardware replaced by an authorized
service center.

• Before starting work, adjust the seating position so that all control

elements can be reached and fully operated.

• Perform the personal adjustment at machine standstill only (for

example of the operator seat, steering column).

• Ensure that all safety devices are properly installed and functional

before starting work.

• Before starting work or after interrupting work, ensure that the brake,

steering, signaling and light systems are functional.

• Before putting the machine into operation, ensure that nobody is in the

danger zone.

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды