Wacker Neuson ET09-02 Скачать руководство пользователя страница 95

Страница: 95 / 248

BA ET16 de* 1.0 * et16i400.fm

4-35

Putting into operation 4

Starts the engine

Control lever base

Raise the control lever base

after stopping the engine.

Control lever base raised:

• The engine will not start unless the control lever base is raised.

Control lever base lowered:

• The engine cannot be started.
All hydraulic functions are locked if the control lever is raised with a
running engine.

Functional check of control lever base

Before starting work, perform a functional check of the control lever base.

1. Start the machine.
2. Fold down the control lever base

3. Perform machine travel on open terrain.
4. Secure the danger zone.
5. Stop the machine.
6. Fold up the control lever base

7. Move all control levers and pedals in all directions.

➥

The selected elements do not move:

➥

Work may be performed with the machine.

8. The selected elements move:

➥

Stop operation immediately.

Contact a Wacker Neuson service center and have the malfunction
rectified.

NOTICE

Possible damage if the engine is started again immediately after stopping
it.

►

Wait at least two minutes before starting the engine again.

NOTICE

Possible damage to preheater if the preheating system is operated too
long.

►

Do not preheat the engine more than five seconds.

Fig. 98 (symbolic representation)

Содержание ET09-02

























































































































































































































































Результаты поиска

Содержание ET09-02

Отзывы:

Похожие инструкции для ET09-02

Бренды по названию

Популярные бренды

Wacker Neuson ET09-02, Руководство оператора

Результаты поиска

Содержание ET09-02

Отзывы:

Похожие инструкции для ET09-02

Бренды по названию

Популярные бренды