Wacker Neuson E13-01 Скачать руководство пользователя страница 58

Страница: 58 / 252

4-4

BA EZ17 en* 1.1 * ez17i400.fm

4 Putting into operation

Seat adjustment

WARNING

Accident hazard when adjusting the operator seat during machine
operation!

Adjusting the operator seat during machine operation can cause serious
injury or death.

►

Adjust the operator seat before putting the machine into operation.

►

Ensure that the levers are locked into place.

Weight adjustment

CAUTION

Spinal cord injury due to incorrect seat adjustment!

An incorrect weight adjustment can cause injury to the spinal cord.

►

Ensure that the seat is correctly adjusted to the operator’s weight
before machine travel or operation.

No load must be applied to the seat while adjusting it.
To adjust to a higher weight:
• Turn lever

downward.

To adjust to a lower weight:
• Turn lever

upward.

Information

Adjust the seat suspension correctly to ensure an optimal level of ride
comfort.

A label on the seat shows the correct position for a specific weight. Weight
adjustment: 50 – 120 kg (110 – 265 lb).

Fig. 47

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 58 / 252

Результаты поиска

Содержание E13-01

Отзывы: