Wacker Neuson E13-01 Скачать руководство пользователя страница 241

Страница: 241 / 252

BA EZ17 en* 1.1 * ez17t900.fm

9-21

Technical data 9

Safety instructions load diagrams

The values of the stability table (load diagram) apply to lifting gear
applications.

DANGER

Crushing hazard due to tipping over of machine!

The machine causes serious injury or death when it tips over.

►

Do not exceed the weights indicated in the load diagrams.

►

Subtract the weight of the attachment from the weight specified in the
relevant load diagram.

►

Use the machine for lifting gear applications only if the mandatory
lifting gear and safety equipment is installed, functional and enabled.

►

Telescopic travel gear extended.

NOTICE

If the weight is exceeded, there is a risk of damage to property if the
machine tips over.

►

Do not exceed the weights indicated in the load diagrams.

Information

The indications are only approximate values. Attachments, uneven
ground and soft or bad ground conditions affect stability and therefore the
weight to be manipulated. The operator must take these influences into
account.

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 241 / 252

Результаты поиска

Содержание E13-01

Отзывы: