manualshive.com logo in svg

Wacker Neuson E13-01, Руководство оператора, Страница: 236 / 252

Поделиться
Скачать
Wacker Neuson E13-01 Скачать руководство пользователя страница 236

9-16

BA EZ17 en*   1.1 *  ez17t900.fm

 

9 Technical data

9.14 Lift capacity/load

Safety instructions lift capacity tables

Observe the values of the lift capacity tables in normal operation (for 
example excavating).
Observe the values of the load diagrams in lifting gear applications.

DANGER

Crushing hazard due to tipping over of machine!

The machine causes serious injury or death when it tips over.

►

The weight of the attachment and load must be subtracted from the 
weight specified in the corresponding column in the table. 

►

Pay attention to the density of the load.

►

Do not exceed the weights indicated in the lift capacity tables.

NOTICE

If the weight is exceeded, there is a risk of damage to property if the 
machine tips over.

►

Do not exceed the weights indicated in the load diagrams.

Information

The indications are only approximate values. Uneven ground or poor 
ground conditions affect machine stability. The operator must take these 
influences into account.

Содержание E13-01





























































































































































































































































Отзывы:

Нет отзывов