Wacker Neuson E13-01 Скачать руководство пользователя

Страница: 205 / 252

BA EZ17 en* 1.1 * ez17w710.fm

7-39

Maintenance 7

7.12 Hydraulic system

Important information on the hydraulic system

WARNING

Burn hazard due to hot hydraulic oil!

Hot hydraulic oil can cause burning to the skin, serious injury or death.

►

Release the pressure in the hydraulic system.

►

Let the engine cool down.

►

Wear protective equipment.

WARNING

Injury hazard due to fluid escaping under pressure!

Hydraulic oil escaping under pressure can penetrate the skin and cause
serious injury or death.

►

Do not operate the machine with leaking or damaged hydraulic system
components.

►

Open the breather filter carefully to slowly release the pressure inside
the reservoir.

►

Wear protective equipment. If oil contacts the eye

flush immediately

with clean water and seek medical treatment.

►

Malfunctioning or leaking threaded fittings, hose connections and
pressure lines must be immediately repaired by a Wacker Neuson
service center. Search for hydraulic leaks with a piece of cardboard.

►

Always consult a doctor immediately, even if the wound seems
insignificant. Hydraulic oil causes blood poisoning.

NOTICE

Damage due to wrong hydraulic oil.

►

Only use hydraulic oil according to the

fluids and lubricants

list.

►

Have the hydraulic oil only changed by an authorised service centre.

NOTICE

Damage to hydraulic system due to incorrect hydraulic oil level.

►

With a warm engine, the hydraulic oil must be about at the middle of
the sight glass.

►

Check the hydraulic oil level once a day.

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Похожие инструкции для E13-01

Бренды по названию

Популярные бренды

Wacker Neuson E13-01, Руководство оператора

Результаты поиска

Содержание E13-01

Отзывы:

Похожие инструкции для E13-01

Бренды по названию

Популярные бренды