Wacker Neuson E13-01 Скачать руководство пользователя страница 195

Страница: 195 / 252

BA EZ17 en* 1.1 * ez17w700.fm

7-29

Maintenance 7

Checking the water separator

Water separator

Empty the water separator if the red indicator ring

rises to position

Emptying the water separator

Information

The fuel system can be bled automatically even if the engine is at
operating temperature

– see chapter “ Bleeding the fuel system” on page 7-31.

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Prepare a suitable container for collecting the fuel/water mixture.
3. Open the engine cover.
4. Turn the ball valve

Off

➥

Fuel supply is interrupted.

5. Unscrew threaded ring

6. Collect the fuel/water mixture in a suitable container.
7. Screw on the thread ring

➥

The indicator ring is at the base of the water separator.

8. Turn ball valve

➥

Fuel supply is open.

9. Close and lock the engine cover.

Fig. 214

Fig. 215

Off

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 195 / 252

Результаты поиска

Содержание E13-01

Отзывы: