Wacker Neuson E13-01 Скачать руководство пользователя страница 193

Страница: 193 / 252

BA EZ17 en* 1.1 * ez17w700.fm

7-27

Maintenance 7

Refueling

WARNING

Explosion hazard due to flammable fuel/air mixtures!

Fuels develop explosive and flammable mixtures with air that can cause
serious burns or death.

►

Fire, open flames and smoking is prohibited.

►

Open tank lock carefully to release the pressure in the fuel tank.

►

Keep the maintenance area clean.

►

Do not refuel in closed rooms.

►

Do not add gasoline to diesel fuel.

►

Let the engine cool down.

CAUTION

Health hazard due to diesel fuel!

Diesel fuel and fuel vapors are harmful to health!

►

Avoid contact with the skin, eyes and mouth.

►

Seek medical attention immediately in case of accidents with diesel
fuel.

►

Wear protective equipment.

CAUTION

Fire hazard due to diesel fuel!

Diesel fuel gives off flammable vapors. This can cause injury.

►

Fire, open flames and smoking is prohibited.

►

Do not add gasoline to diesel fuel.

NOTICE

Do not refuel with cans in order to avoid dirt in the fuel.

Environment

Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 193 / 252

Результаты поиска

Содержание E13-01

Отзывы: