Wacker Neuson E13-01 Скачать руководство пользователя страница 192

Страница: 192 / 252

7-26

BA EZ17 en* 1.1 * ez17w700.fm

7 Maintenance

7.6

Lubrication work

– see chapter “ Preparing lubrication” on page 7-7

7.7

Fuel system

Important information regarding the fuel system

Information

In order to prevent the formation of condensation water, fill up the fuel tank
nearly completely at the end of each working day.

Information

Do not run the fuel tank completely dry. Otherwise, air is drawn into the
fuel system. This requires bleeding the fuel system.

Diesel fuel specification

NOTICE

Engine damage due to incorrect or dirty diesel fuel.

►

Only use clean diesel fuel according to the

fluids and lubricants

list.

►

Do not use any diesel fuel with additives.

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 192 / 252

Результаты поиска

Содержание E13-01

Отзывы: