Wacker Neuson E13-01 Скачать руководство пользователя страница 106

Страница: 106 / 252

5-16

BA EZ17 en* 1.1 * ez17b510.fm

5 Operation

Dozer blade

WARNING

Crushing hazard due to unintentional actuation!

Unintentional actuation can cause serious injury or death.

►

Raise the control lever base.

►

Lower the stabilizer blade to the ground after the work shift.

►

Do not allow anyone to stay in the danger zone.

NOTICE

Lowering the stabilizer blade too deeply into the ground can create
increased resistance.

►

Slightly raise the stabilizer blade. The clearance between the stabilizer
blade and the ground should be about 1 cm (0.4 in).

►

Check the stabilizer-blade position before performing machine travel.

Information

In order to achieve the best possible stability, lower the stabilizer blade.

The stabilizer blade is also used as a parking brake. Press the stabilizer
blade against the ground.

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 106 / 252

Результаты поиска

Содержание E13-01

Отзывы: