Wacker Neuson DV60 Скачать руководство пользователя страница 178

Страница: 178 / 212

7-28

BA D24 en/us* 1.0 * D24_1_0_710.fm

7 Maintenance

7.11 V-belt

Have the V-belt tension checked and the V-belt re-tensioned only by a
Wacker Neuson service center.

7.12 Hydraulic system

Important information on the hydraulic system

WARNING

Burn hazard due to hot hydraulic oil!

Hot hydraulic oil can cause burning to the skin, serious injury or death.

► Release the pressure in the hydraulic system.
► Let the engine cool down.
► Wear protective equipment.

WARNING

Injury hazard due to fluid escaping under pressure!

Hydraulic oil escaping under pressure can penetrate the skin and cause
serious injury or death.

► Do not operate the vehicle with leaking or damaged hydraulic system

components.

► Open the breather filter carefully to slowly release the pressure inside

the reservoir.

► Wear protective equipment. If hydraulic oil contacts the eye flush

immediately with clean water and seek medical treatment.

► Have damaged or leaky screw connections, hoses and pressure lines

immediately repaired or replaced by a Wacker Neuson service center.
Search for hydraulic leaks with a piece of cardboard.

NOTICE

Damage due to wrong hydraulic oil.
► Only use hydraulic oil according to

Fluids and lubricants

► Have the hydraulic oil only changed by an authorized service center.

NOTICE

Damage to hydraulic system due to incorrect hydraulic oil level.
► With a warm engine, the hydraulic oil must be about at the middle of

the sight glass.

► Check the hydraulic oil level once a day.

Содержание DV60





















































































































































































































Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson DV60, Руководство оператора

Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды