manualshive.com logo in svg

Wacker Neuson DV60, Руководство оператора

Поделиться
Скачать
Wacker Neuson DV60 Скачать руководство пользователя страница 166

7-16

BA D24 en/us* 1.0 * D24_1_0_700.fm

 

7 Maintenance

Engine compartment

1. Park the vehicle in a wash bay or place suitable for washing.
2. Stop the engine 

– see "Preparing lubrication" on page 7-6

. 

3. Clean the vehicle.

Seat belt

Always keep the seat belt clean as coarse dirt can impair the proper 
functioning of the seat belt buckle. 
Clean the seat belt (while it remains fitted in the vehicle) with a mild soap 
solution only. Do not use chemical agents as they can destroy the fabric.

Cleaning in a saline environment

1. Park the vehicle in a wash bay or place 

– see "Preparing lubrication" 

on page 7-6

.

2. Check the vehicle for salt deposits or corrosion. Have corrosion 

removed by a Wacker Neuson service center.

3. Clean the vehicle with a high-pressure cleaner. Clean the vehicle 

ensuring that there are no salt deposits in places that are difficult to 
access.
Bear in mind the information on cleaning and maintenance.

4. Lubricate the vehicle according to the lubrication schedule
5. Allow the vehicle to dry and check it again for salt deposits.

Loose threaded fittings and attachments

Contact a Wacker Neuson service center.

Содержание DV60





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды