Wacker Neuson DV60 Скачать руководство пользователя страница 164

Страница: 164 / 212

7-14

BA D24 en/us* 1.0 * D24_1_0_700.fm

7 Maintenance

7.5

Cleaning and maintenance

WARNING

Injury hazard due to rotating parts!

Rotating parts can cause serious injury or death.

► Open the maintenance flap only at engine standstill.

WARNING

Burn hazard due to hot surfaces!

Hot surfaces can cause serious burns or death.

► Stop the engine and let it cool down.
► Wear protective equipment.

CAUTION

Health hazard due to cleaning agents!

Cleaning agents can be harmful to health

► Use only suitable cleaning agents.
► Ensure sufficient ventilation.

NOTICE

Damage to rubber and electrical parts when cleaning with solvents.
► Do not use solvents, benzine, or other aggressive chemicals.

NOTICE

Damage to electronics due to water jet.
► Do not point the water jet directly at electric components, and protect

the electric components against humidity.

► If water contacts electrical components, dry them with compressed air

and apply contact spray to them.

Environment

In order to avoid damage to the environment, clean the machine only in
wash bays and places provided to this effect.

Содержание DV60





















































































































































































































Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson DV60, Руководство оператора

Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды