Wacker Neuson DV60 Скачать руководство пользователя страница 136

Страница: 136 / 212

5-28

BA D24 en/us* 1.0 * D24_1_0_510.fm

5 Operation

Maneuvering operation (option)

For pulling trailers in the construction site area, the vehicle has a
maneuvering coupling

Pulling trailers is prohibited on public roads.
• The vehicle skip must be 25% filled in maneuvering operation. The

gross weight rating of the trailer and the contents of the skip may not
exceed the vehicle’s payload.

• Secure the pin

of the maneuvering coupling with a splint pin

• Secure the trailer to prevent it from rolling away (for example with

wheel chocks, blocks).

• Ensure that all lights and associated indicator lights are functional. The

plug receptacle

for the power supply of auxiliary units is located at

the rear of the vehicle.

NOTICE

Only attach the hitch to the maneuvering coupling.

Information

Observe the national and regional regulations.

Fig. 142

Payload

kg (lbs)

Skip contents

kg (lbs)

Gross weight rating

trailer kg (lbs)

braked with

DIN towing eye (F)

Gross weight rating

trailer kg (lbs) braked

with

ball coupling (E)

Gross weight rating

trailer kg (lbs)

unbraked with

DIN towing eye (F) or

ball coupling (E)

6000 (13,230)

1500 (3310)

3500 (7720)

1500 (3310)

750 (1650)

9000 (19,850)

2250 (4970)

3500 (7720)

1500 (3310)

750 (1650)

10,000 (22,050)

2500 (5520)

3500 (7720)

1500 (3310)

750 (1650)

Fig. 143 Symbolic photo

Содержание DV60





















































































































































































































Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson DV60, Руководство оператора

Результаты поиска

Содержание DV60

Отзывы:

Бренды по названию

Популярные бренды