Wacker Neuson DV60 Скачать руководство пользователя

Страница: 127 / 212

BA D24 en/us* 1.0 * D24_1_0_510.fm

5-19

Operation 5

5.9

Operating hydraulics

Skip operation

Operate the skip with the control lever.

WARNING

Accident hazard during machine travel with a tilted-out skip!

Can cause serious injury or death.

► Driving with a tipped skip is prohibited on public roads.
► Driving with a tipped skip is only allowed at walking speed in the

construction site area if the operator is supported by a bystander.

► Do not tilt out the skip if material is stuck in the skip. Remove the

material from the skip with a suitable tool.

► Keep a safe distance (for example from buildings, edges of building

pits) as you tilt out the skip.

► Perform machine travel only on firm ground.

WARNING

Crushing hazard due to machine tipping over!

Tilting out the skip very quickly can cause the machine to tip over. Serious
injury or death can be caused by a tipped-over machine.

► Slowly activate the skip.

NOTICE

Lowering the skip very quickly onto the chassis can cause damage to the
machine.

Operation

Содержание DV60





















































































































































































































Результаты поиска

Содержание DV60

Отзывы:

Похожие инструкции для DV60

Бренды по названию

Популярные бренды

Wacker Neuson DV60, Руководство оператора

Результаты поиска

Содержание DV60

Отзывы:

Похожие инструкции для DV60

Бренды по названию

Популярные бренды