Wacker Neuson DS 70, Руководство оператора, Страница: 27 / 50

wc_tx003057gb.fm
27
DS 70 Operation
4.6 Starting, Operating, and Stopping the Machine
Requirements
„
Rammer is in serviceable condition and has been properly maintained
„
There is fuel in the tank
„
Rammer has been upright for at least 45 minutes
Starting the
machine Perform the procedure below to start the machine.
1. Turn the fuel valve (a) to the “O” (open) position.
2. Move the throttle to the slow / idle position (c2) .
3. Pull the starter rope repeatedly until the engine starts.
Multiple pulls of the starter rope (usually fewer than five) may be required to start
an engine:
„
on a new machine being operated for the first time
„
that has not been run for a long period of time (a week or more)
„
that has been run completely out of fuel
„
in cold weather conditions
This procedure continues on the next page.
wc_gr009071
O
a