manualshive.com logo in svg

Wacker Neuson DPU 3050H, Руководство оператора, Страница: 43 / 64

Поделиться
Скачать
Wacker Neuson DPU 3050H Скачать руководство пользователя страница 43

9 Maintenance

43

9.2.6

Changing the engine oil

Note:

The work area should be covered with a waterproof sheet to protect 
the floor (protection of the environment).

Note:

Drain the oil while the engine is still hot. This ensures that the oil will 
be drained quickly and completely.

1. Place the machine upright on a flat surface.
2. Bring the engine to a hand warm temperature, either by letting it cool down 

or running it until it is warm.

3. Switch off the engine.
4. Unscrew and remove the oil level dipstick.
5. Screw the oil drain hose onto the oil change valve.

Collect the oil with a suitable container and dispose of properly.

6. Top up oil via the filler neck and check oil level.

See the chapter 

Technical data

 for oil quantity and oil specification.

7. Unscrew oil drain hose and screw on oil change valve.
8. Screw in the oil level dipstick and tighten it by hand.

Note:

Dispose of the used oil in accordance with the applicable regulations.

Item

Designation

Item

Designation

1

Oil level dipstick

3

Oil drain hose

2

Oil change valve

Содержание DPU 3050H

































































Отзывы:

Нет отзывов