Wacker Neuson 803 Dualpower Скачать руководство пользователя страница 142

Страница: 142 / 228

5-2

OM 803 us – Edition 3.7 * * 803b510.fm

Maintenance

5.2 Fuel system

Specific safety instructions

Warning!

WARNING
Burn hazard when refueling!

Can cause serious injury or death.

•

Fire, open flames and smoking is prohibited.

•

Keep the maintenance area clean.

•

Do not refuel in closed rooms.

•

Do not add gasoline to the diesel fuel.

•

Let the engine cool down.

Warning!

WARNING
Health hazard due to diesel fuel!

Can cause serious injury or death.

•

Avoid contact with the skin, eyes and mouth.

•

Seek medical attention immediately in case of accidents with diesel fuel.

•

Wear protective equipment.

Warning!

WARNING
Fire hazard due to diesel fuel!

Can cause serious injury or death.

•

Fire, open flames and smoking is prohibited.

•

Adding gasoline is prohibited.

• Before refueling, stop the engine, raise the lock lever and remove the starting key!
• Do not refuel in closed rooms!
• Wipe away fuel spills immediately!
• Keep the machine clean to reduce the fire hazard!

Содержание 803 Dualpower





































































































































































































































Результаты поиска

Содержание 803 Dualpower

Отзывы:

Похожие инструкции для 803 Dualpower

Бренды по названию

Популярные бренды

Wacker Neuson 803 Dualpower, Руководство оператора

Результаты поиска

Содержание 803 Dualpower

Отзывы:

Похожие инструкции для 803 Dualpower

Бренды по названию

Популярные бренды