Wacker Neuson 803 dual power, Руководство оператора

Страница: 92 / 228

3-38
OM 803 us – Edition 3.7 * * 803b330.fm
Operation
Seat belt C is for the operator’s safety.
Fastening the seat belt:
☞ Fasten the seat belt as follows before starting the machine:
• Hold belt on buckle latch A and run it slowly and steadily over the hips to buckle B
• Insert buckle latch A into buckle B until it engages audibly (pull test)
• Tighten the seat belt by pulling at its end
➥ The seat belt must be tightly in place over the hips!
Unfastening the seat belt:
☞
Unfasten seat belt C as follows:
• Hold the seat belt
• Press button
D on buckle B
➥ Latch A is released by spring pressure
• Unfastening the seat belt
Longer/shorter seat belt adjustment:
☞ Lengthen the seat belt as follows:
• Hold buckle latch A at a right angle to the seat belt and pull the seat belt to the
required length
• To shorten the seat belt, just pull the free end E of the belt
Fig. 91: Fastening the seat belt
C
B
A
Fig. 92: Unfastening the seat belt
C
B
A
D
30763b0005.eps
Fig. 93: Longer/shorter seat belt adjustment
A
E