manualshive.com logo in svg

Wacker Neuson 50Z3, Руководство оператора

Поделиться
Скачать
Wacker Neuson 50Z3 Скачать руководство пользователя страница 71

BA 50Z3/6003 en – Edition 4.3 * 5003b320.fm

3-15

Operation

Check lists

The checklists below are intended to assist you in checking and monitoring the machine 
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you 
in fulfilling your duties as a conscientious operator.
The checking and monitoring work listed below is described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault 
before the machine can be put into operation.

Start-up checklist

Check the following points before putting the machine into operation:

No. Question

✔

1 Enough fuel in the tank? (

➠

 

5-3

)

2 Coolant level OK? (

➠

 

5-10

)

3 Remove water in the diesel fuel prefilter (

➠

 

5-6

)

4 Engine oil level OK? (

➠

 

5-7

)

5 Oil level in hydraulic tank OK? (

➠

 

5-29

)

6 Water level in washer tank OK? (

➠

 

3-36

)

7 V-belt condition and tension checked? (

➠

 

5-25

)

8 Lubrication points greased? (

➠

 

5-36

)

9 Tracks checked for cracks, cuts etc.? (

➠

 

5-33

)

10 Lights, signals, indicators, warning lights and indicator lights OK? 

(

➠

 

3-30

)

11 Dirt (for example mud, snow, ice, etc.) removed from all windows, mirrors, 

lights, footholds, drive pedals and control levers?

12 Are all mirrors functional and adjusted correctly?

Are other persons required to guide you?

13 Control lever base folded up? (

➠

 

3-60

)

14 Attachment safely locked? (

➠

 

3-103

)

15 Engine cover safely locked? (

➠

 

3-63

)

16

Especially after cleaning, maintenance or repair work:

➥

Rags, tools and other loose objects removed? 

17 Seating position adjusted correctly? (

➠

 

3-37

)

18 Seat belt fastened? (

➠

 

3-45

)

Содержание 50Z3





































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды