Wacker Neuson 1101C Скачать руководство пользователя страница 143

Страница: 143 / 180

BA 901/1101 en – Edition 2.1 * 91101b530.fm

5-19

Maintenance

5.8

Travel gear maintenance

Danger!

Improper travel gear repairs

Accident hazard!

☞

All repair work on tracks, tires and rims may only be performed by
authorized service centers

Notice!

Regular inspections of the tires/tracks
• Improve operating safety
• Increase the service life of the tires/tracks
• Reduce machine downtimes

Refer to

Chapter

6 “Technical data”

for the authorized tire/track types and the

correct tire pressures.

☞

Perform the following maintenance once a day:

• Check tire pressure/track tension
• Check tracks and track rollers/tires and rims for damage (cracks, ageing, etc.)

☞

Also on the inside!

• Remove foreign bodies from the tire tread.
• Remove traces of oil and grease from the tires/tracks.
• Check tires/tracks for wear and measure tread depth.
• Remove foreign bodies or accumulation of earth.

Mainte-

Содержание 1101C





















































































































































































Результаты поиска

Содержание 1101C

Отзывы:

Похожие инструкции для 1101C

Бренды по названию

Популярные бренды

Wacker Neuson 1101C, Руководство оператора

Результаты поиска

Содержание 1101C

Отзывы:

Похожие инструкции для 1101C

Бренды по названию

Популярные бренды