manualshive.com logo in svg

Wacker Neuson 1001, Руководство оператора

Поделиться
Скачать
Wacker Neuson 1001 Скачать руководство пользователя страница 94

5-10

BA 1001/1501/2001 us – Edition 3.3 * * 12001b510.fm

Maintenance

5.4

Engine lubrication system

NOTICE

Engine damage and loss of output in case of insufficient engine oil level, or 
wrong engine oil!

☞

Have the oil changed by a Wacker Neuson service center

– see chapter 5.16

 Maintenance plan 2001 (overview)

 on page 5-39

Important

In order to avoid engine damage, add the engine oil slowly so it can go down 
without entering the intake system.

Checking the oil level

Important

Check the oil level once a day.
We recommend checking it before starting the engine. After stopping a warm 
engine, wait at least 5 minutes before checking.

Checking the oil level 

☞

Proceed as follows:

• Park the machine on level ground
• Stop the engine!
• Let the engine cool down
• Open the engine cover
• Clean the area around the oil dipstick with a lint-free cloth
• Oil dipstick 

A

:

☞

Pull it out

☞

Wipe it with a lint-free cloth

☞

Push it back in as far as possible

☞

Withdraw it and read off the oil level

☞

However if necessary, add oil at the latest when the oil reaches the MIN mark on the oil 
dipstick

A 

Fig. 81: Checking the oil level

A

Содержание 1001





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды