Wachs TFS, Руководство пользователя

Страница: 17 / 22

TUBE & FITTING SQUARING MACHINE TFS
SECTION VIII
TFS TROUBLE SHOOTING
Trouble Possible Cause Remedy
Machine Won't Run .......................... Power Unit Not Connected ............................ Check Power Cord & Connection
Work Piece Shifts Under .................. Loose Shoe Clamp ......................................... Check Tension on Shoe Clamp Handle
Cutting Load
Poor Workpiece End Quality .............. Dull or Chipped Tool Bit .................................. Replace Tool Bit
Machine Chatters During Cut ............. RPM Speed of Tool Head ................................ Refer to Section on Machining Tips
is Set Too Fast or Feed Rate
is too light
1 5 .