manualshive.com logo in svg

Wachs DW Guillotine 208, Руководство пользователя

Поделиться
Скачать
Wachs DW Guillotine 208 Скачать руководство пользователя страница 28

DW Guillotine 208

24

Part No. 29-MAN-00, Rev. A

E.H. Wachs

Figure 3-5.  Secure the saw to the cart with the storage 
strap.

O

PERATING 

F

EATURES

This section provides an overview of the DW 208’s config-
uration and operating features.

Covers

The DW 208 has 5 safety covers. The covers must be in 
place at all times while operating the machine. Open the 
covers only to remove/install the cutting wire or to perform 
maintenance. Disconnect the hydraulic hoses from the 
machine before opening any of the covers.

• The front cover, over the drive wheel, is secured 

with a locking latch.

• The 2 wire channel covers on the arm assemblies are 

secured with locking latches.

• The 2 idler wheel covers are secured by the wire 

channel covers. Close the wheel covers first, then 
close and latch the wire channel covers.

Содержание DW Guillotine 208























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды