INSTALLATION INSTRUCTION
24VDC Dim-To-Warm POWER SUPPLY
A2D50-60, A2D50-96
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
AiSPiRE retains the right to modify the design of our products at any time as part of the company's continuous improvement program
. March 2022
1.
SAFETY INSTRUCTION
IMPORTANT: NEVER attempt any work without shutting off the electricity.
•
Always turn off power at fuse box prior to installation to prevent electrical shock.
•
For installation and serviced by a qualified, licensed electrician.
•
Install in accordance with national electric code, and local regulations.
•
Consult with local inspector to assure compliance.
CAUTION
•
Read all instructions before installing.
•
Handle product with care.
•
Do not modify or disassemble product beyond instructions or warranty will be void.
•
Failure to follow safety warnings, and installation instruction will void the warranty
•
This power supply is designed to work with only AiSPiRE Dim-To-Warm tape light.
FEATURES
•
Protection: short circuit/over loading/over temperature
•
24VDC Output, 4A Max (96W) & 2.5A Max (60W) Output Current on each output channel
, ≥
0.9 pf
•
Ambient Temp: -20ºC to 45ºC (-4°F to 113°F)
•
Full protection aluminum housing for dry and damp location
PRODUCT DIMENSION:
60W & 96W
