WABCO TAILGUARD, Описание системы

Страница: 25 / 64

25
Installation
7 Installation
All system components – except Trailer Remote Control – can be installed
outside on the vehicle frame.
Note the respectively permissible installation position of the components in
accordance with the outline drawings.
7 .1 Notes on installing the Electronic Extension Module
„
Before you start the installation you must note the safety instructions
on the subject of ESD,

Chapter "2.1 General safety instructions",
page 7.
„
The cover of the Electronic Extension Module must be removed for
installing/removing the cable.
„
Use a screwdriver (minimum length: 11 cm) to loosen the locking lugs
of housing to remove the cover.
„
Download the outline drawing from the internet:
Information on the Electronic Extension Module
http://www.wabco.info/i/1488
Installation dimensions of the Electronic Extension Module in mm
„
Mount the Electronic Extension Module vertically only, with the cable
openings facing the bottom or the side.
„
Fasten the connector housing of the 8-pin plug-in connector with cable
ties on the respective bracket catch.