WABCO OptiTire, Описание системы

Страница: 54 / 72

54
Start-up Operation
„
Reset and leakage parameter:
If activated, another page displays the parameters for resetting the leakage
algorithm are displayed.
„
DM1 message:
These parameters define the conditions for sending DM1 messages and
whether they should be empty (no event present) or filled (event present) in
a fault-free state.
8.3 Finalising start-up
– Delete content of diagnostic memory (start window:
Messages - Diagnostic
memory
).
– Check if data has been received from all sensors
(start window: Measured values => Module reception ).
– Print out the start-up log by clicking the accompanying button ( Start-up
window).
– Print the vehicle label onto self-adhesive aluminium foil (WABCO part
number: 899 200 922 4) ( Start-up window).
– Attach the vehicle label to the vehicle where it is protected and legible.
– Exit the start-up procedure in the diagnostic software.
– Check operation on display and data exchange with towing vehicle
respectively.