WABCO OPTIFLOW SIDEWINGS, Руководство по установке

Страница: 13 / 55

13
OptiFlow™ SideWings
Installation
5.2 Preparations
!
Two workers are required for the installation.
Accuracy determines how well the complete installation fi ts.
– – Check that two drawings have been delivered with the system: Check that two drawings have been delivered with the system:
SideWings Setup : In this drawing a complete component list is given as
well as the general location of each part in relation to the others. You will fi nd
an example in the “Appendix” chapter.
SideWings Positioning : In this drawing the positioning of the tailored
OptiFlow SideWings confi guration is shown. All measurements are based
on the wheel base and King Pin location. You will fi nd an example in the
“Appendix” chapter.
– Check if the lenght of the SideWings fi ts to the vehicle.
Mudguards should be adjusted before installing the OptiFlow SideWings Mudguards should be adjusted before installing the OptiFlow SideWings
system.
system.
– – Check if there is enough space to locate the MidSkirts. Check if there is enough space to locate the MidSkirts.
If there is not enough room, it is usually possible to slide the mudguards
inwards (towards the I-Beams), thus giving room for the MidSkirts to be
positioned.
– Keep connections for side markers on the MidSkirts.
– Ensure that important accessories such as the extinguisher or control
elements remain accessible after installation.
– – Remove back door retainers (if EndSkirt includes a back door retainer, no Remove back door retainers (if EndSkirt includes a back door retainer, no
other back door retainer can be present).
other back door retainer can be present).
!!
If additional bore holes are needed in the vehicle frame, please check this If additional bore holes are needed in the vehicle frame, please check this
with the vehicle manufacturer.
with the vehicle manufacturer.
If you are drilling bore holes without the permission of the vehicle
If you are drilling bore holes without the permission of the vehicle
manufacturer, your warranty could be affected through an additional risk of
manufacturer, your warranty could be affected through an additional risk of
corrosion.
corrosion.
CAUTION
Damage to vehicles with leveling systems
With leveling systems, ensure there is always a suffi cient clearance between With leveling systems, ensure there is always a suffi cient clearance between
the SideWing and the ground to avoid damage to the system and vehicle.
the SideWing and the ground to avoid damage to the system and vehicle.