W6 N 707D free-arm Скачать руководство пользователя страница 8

Страница: 8 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

What we expect from you

Safety notes

1.5 What we expect from you

Specific knowledge and skills are required when working with this cover:

•

You should be confident when working with the cover.

•

You must have read and understood this manual.

•

Always have a clear head when working with the cover.

•

Never work with the cover when under the influence of alcohol or

drugs.

•

Please read and observe the package insert when taking medication.

•

If you are pregnant, obtain assistance when assembling and moving

the cover.

•

Do not dismantle the cover – rather leave this to a trained specialist.

However, please keep in mind that you must perform basic

maintenance activities yourself.

•

You are personally suited to operate the cover.

•

In case of doubt, always contact our service department by email:

[email protected].

•

Only allow an authorised workshop to work on electrical components.

Moreover, W6 WERTARBEIT offers the following options on its website

for free. To access these, please go to our website using www.w6-

wertarbeit.de and select “HELP”:

•

Criteria for the optimal threading of a W6 N 707D free-arm (4-min.

video).

•

A tutorial video specifically for the W6 N 707D free-arm.

•

Tips and tricks for the W6 N 707D Free Arm.

•

A visual selection of stitches and their use.

Содержание N 707D free-arm




























































































Результаты поиска

Содержание N 707D free-arm

Отзывы:

Похожие инструкции для N 707D free-arm

Бренды по названию

Популярные бренды

W6 N 707D free-arm, Руководство пользователя

Результаты поиска

Содержание N 707D free-arm

Отзывы:

Похожие инструкции для N 707D free-arm

Бренды по названию

Популярные бренды