W.E.S.T. Elektronik PAM-199-P, Техническая документация инструкция, Страница: 21 / 48

Page 21 of 48 PAM-199-P 05.06.2020
4.4.6 Parameter list
Command Defaults Unit Description
FUNCTION 196 -
Defining functionality
LG EN -
Changing language help texts
MODE STD -
Parameter mode (standard or expert)
SENS AUTO
Activation and deactivation of the monitoring functions
CCMODE OFF -
Activation and deactivation of the characteristic linearization
ENABLE_B OFF
OFF = Enable for both channels via PIN 15
LIM:A
LIM:B 0
0 0,01 %
0,01 %
Range of the input signal monitoring (e. g. detecting failures of joy-
sticks)
POL:A
POL:B +
+ -
-
Changing output direction
AINA
AINB V
V -
-
Simple input switchover between current (4...20 mA) and voltage
(±10 V). Command is active if MODE = STD.
AIN:A
AIN:B A: 1000
B: 1000
C: 0
X: V -
-
0.01 %
-
Free scaling of the analogue input signal
AA:UP
AA:DOWN 100
100 ms
ms
Two quadrant ramp Channel A
AB:UP
AB:DOWN 100
100 ms
ms
Two quadrant ramp Channel B
CCA
CCB X Y
X Y -
-
Linearization function
MIN:A
MIN:B 0
0 0,01 %
0,01 %
Compensation of the dead band
MAX:A
MAX:B 10000
10000 0,01 %
0,01 %
Scaling of the max. output signal
TRIGGER 200 0,01 %
Trigger point for activating the MIN value.
CURRENT:A
CURRENT:B 1000
1000 mA
mA
Nominal output current.
DAMPL:A
DAMPL:B 500
500 0,01 %
0,01 %
Dither amplitudes. Related to the nominal output current.
DFREQ:A
DFREQ:B 121
121 Hz
Hz
Dither frequency
PWM:A
PWM:B 2604
2604 Hz
Hz
PWM frequency
ACC ON -
Automatic adjustment of PPWM and IPWM parameters
PPWM:A
PPWM:B
IPWM:A
IPWM:B 7
7
40
40
-
-
-
-
Parameters for the closed loop current controllers