Part number 20047, Rev 0
4
INSTALLATION INSTRUCTION
REQUIRED TOOLS –
9/16” socket or wrench, ¾” open end wrench, Phillips head screwdriver,
and level.
UNCRATING –
Move your refrigerator as close to the final location as possible before removing the wooden
skid. The location should be as close as possible to the power outlet, so the extend cord is not
needed.
PLEASE NOTE!
Your refrigerator or freezer is designed as INDOOR USE and should be operated
at air conditioned room temperature between 65°F to 85°F.
Remove the lower grill assembly from the front of cabinet.
Skid bolts are located in each of 4 corners inside cabinet bottom. (See photo A). Remove skid
bolts. (See photo B). Carefully lift cabinet off of skid. Replace the lower grill assembly back
onto the refrigerator.
For Swing Door(s) Model -
Remove door support bracket on interior bottom of the swing glass door and discard (see
Image 1 & 2).
