Instruction Manual INCU-Line Premium Peltier Cooled
Page
47
/
54
7. TEMPERATURE PROTECTION
Temperature protection is included as standard, if damage occurs to the temperature controller or the user
changes the temperature settings outside of the upper and lower limits, temperature protection will activate.
Protection class 3.3 is a standard. The figure below shows how this works.
Protection Class 3.3. according to DIN 12880 norm is called protecting sample function. The User can set
the temperature protection (lower and upper limits) by himself and when the set temperature falls outside of
this range, the power of Peltier elements is switched off. When the temperature returns to within normal pa-
rameters, the device continues to work normally.
8. REMOTE CONTROL OF THE UNIT
Every Premium unit can be connected to the Ethernet network and controlled remotely using the Premium
Control software. The features of the program have been described in a separate instruction manual.
9. OPERATION OF THE COOLING SYSTEM
The thermoelectric incubator relies on Peltier effect. Cooling elements are Peltier Modules which act as a
heat pump transporting heat / cold in the direction of the flow current. The cooling system is constructed of
Peltier modules, fans and radiators. Contrary to refrigerated units, it has a long operating life, no moving
parts, the ability of reverse operation i.e., the quick and easy transition from cooling to heating and vice ver-
sa, quiet operation and the absence of harmful environmental and flammable refrigerants.