VWR 390-1341 Скачать руководство пользователя страница 39

Страница: 39 / 50

Instruction Manual INCU-Line Cooled

Page

7.4.

Access port

30 mm access port can be used to insert an external temperature sensor, which has been secured with

a silicon plug. The plug should cover the access port while the unit is operating. If multiple cables have been

inserted through the access port and if it is not possible to use the plug, secure the access port with adhesive

tape. If you leave the access port open, it may affect temperature stability and uniformity within the chamber.

7.5. Open door alarm

All incubators have been equipped with an open door sensor. If you open the door, icon:

appear on the display.

If you leave the door open for more than 60 seconds, an alarm will sound and the control bar will be red. The

alarm event “door open” is displayed in the list, with the status alarm active.

7.6. Internal LED light

All incubators have been equipped with internal lighting which switches on when opening the door - LED

lights (Philips Corepro LEDspot 3.5-35W GU10 827 36D). Once the light has been switch on, a bulb icon

will appear on the display.

Open door sensor

Содержание 390-1341



















































Результаты поиска

Содержание 390-1341

Отзывы:

Бренды по названию

Популярные бренды

VWR 390-1341, Инструкция по эксплуатации

Результаты поиска

Содержание 390-1341

Отзывы:

Бренды по названию

Популярные бренды