Thank you very much,
That you have chosen Vutlan “Room Guard VT335”.
You can find all the latest documentation about installing and configuring the device at:
https://vutlan.atlassian.net/wiki/spaces/DEN
For all other support materials please refer to:
http://www.vutlan.com/en/content/14-support
All the latest drivers for Vutlan products are listed at:
https://vutlan.atlassian.net/wiki/spaces/DRIV
Please refer to our forum for any questions:
http://www.vutlan.com/forum/
If you have any further questions, please contact Vutlan Support Team by e-mail at:
Please provide our support staff with the following information:
- Exact facts including information about your system environment
- Product name (s) including serial number (s)
- Installed firmware version of your Vutlan Monitoring System
Quick start Guide : Connecting to the unit by IP
All Vutlan monitoring systems have an integrated web interface. To access this interface, you must first
open a web-Browser. Enter the IP address of your “VT335 / Room Guard” in the input line of your browser.
Attention
: Vutlan Monitoring systems use HTML5. Please make sure you are using the latest version of
your browser. System interface was tested under Chrome, Firefox and Safari.
1
DHCP client
switched off
2
Hostname
Vutlan
3
IP-address
192.168.0.193
4
Network mask 255.255.255.0
5
Broadcast
192.168.0.1
6
Gateway
192.168.0.255
7
Primary DNS
192.168.0.1
Attention:
In order to access the Monitoring System web
interface, your computer must be on the same network! To
ensure this, please set the subnet mask 255.255.255.0 and
the IP address 192.168.0.xxx on your computer. Xxx stands
for a number between 0 and 254.
Log in as “guest” and configure the users and their rights.
The user name is: guest
The password / login is: guest
