MANUAL
Seesaw Swing
Position a Top Bracket on top
of your Swing Rail, and the Top
Connector underneath.
Secure the parts together with
Hanging Bolts.
Insert a Foot into the end of each
Bottom Bar.
Ensure that those for the Left and
Right are on the appropriate side.
Attach a Seat to each
end of the Base Rail.
You have attached the Seesaw Swing
to your Swing Set.
CONGRATULATIONS!
2
STEP
6
STEP
5
STEP
1
STEP
3
STEP
4
STEP
VULY MINI:
VULY MAX:
Insert the ends of the Bottom Bars
into the Top Bars.
Secure the parts with Frame Bolts.
Insert Bushings into the four holes in the Base Rail.
Insert Bushings
into the four
holes in the Top
Connector.
Insert the small end of the Max Tubes into
the ends of the Top Bars, and the Bottom
Bars into the large ends of the Max Tubes.
Secure the parts with Frame Bolts.
Insert Bottom Bars
(Male) onto one
side and Bottom
Bars (Female) into
the other.
Insert a Top Bar (Male) and Top Bar (Female) into the
Bushings on one side of the Top Connector.
Repeat for the other side, but swap the positioning of
the Male and Female Top Bars.
A.
A.
B.
B.
ENSURE THAT AS YOU FOLLOW THESE INSTRUCTIONS, YOU FIRMLY SECURE ALL PARTS WITH NUTS AND BOLTS.
YOU MUST USE A 17 MM SPANNER
(NOT SUPPLIED) TO TIGHTEN THE HANGING BOLTS.
You must ensure that the Top Bracket is tightened
evenly, or the bolt threading may strip – causing the
swing to weaken and become unsafe.
WARNING:
