Fig. 4
5.
Slide right side rear panel up and to the right to
remove.
6.
Reverse procedure to install.
Left Side Panel
1.
Remove screws along right side, middle left side,
and bottom.
2.
Loosen screws on top and bottom on left side of
panel.
3.
Loosen two screws near front of oven, which
secure bottom front cover.
Fig. 5
4.
Lift up and pull away to remove.
5.
Reverse procedure to install.
Control Panel
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1.
Remove three screws on right side which secure
control panel, then lift up and pull away.
Fig. 6
2.
Disconnect temperature probe leads from solid-
state temperature control.
3.
Unplug wire harnesses connector to control
panel components.
4.
Unplug Ground wire from control panel.
5.
Reverse procedure to install.
FAN COVER
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1.
Remove racks.
VC5ED FULL SIZE ELECTRIC CONVECTION OVEN - REMOVAL AND REPLACEMENT OF PARTS
F45652 (0217)
Page 6 of 31
