REMOVAL AND REPLACEMENT OF PARTS
ELECTRICAL COVER
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
Take care when removing rear electrical
cover as it can fall free and pull loose or damage wires.
NOTE:
Do NOT remove screws that secure rear
panel to chassis.
1.
Remove four fasteners and electrical cover (Fig.
1).
Fig. 1
BULLNOSE
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1.
Remove fasteners and bullnose (Fig. 2).
Fig. 2
ELEMENT HEAD COVER
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
Parts may be hot. Use care when
handling them.
1.
Drain shortening from fry tank.
2.
Remove screws (Fig. 3) from rear of element
head assembly.
Fig. 3
3.
Raise heating elements (Fig. 4) and place 2x4
lumber under them for support.
CEF40/75 FRYER - REMOVAL AND REPLACEMENT OF PARTS
F45657 (0517)
Page 4 of 25
