Note: This unit is easier to assemble with two people.
Tools required
Hex wrench
L key
Adjustable wrench/pliers
Rubber mallet
WARNING:
Please keep
the TV mounting screws
M5, M6, M8, M10 and the L
key in a secure location as
they may be required for
use with the flat panel TV
at a later time.
Page 1
( Instructions continued on next page )
Model:10400
Screw table
Some screws may have already
screwed on the related parts.
N
M
(On the upper horizontal mount)
I
H
L
G
K
For TV set
M5x10
M5x12
M6x12
M8x16
M10x16
For TV set
For TV set
(On the lower horizontal mount)
(On the handle rail)
(On the lower pole)
(On the handle bar & handle support bar)
(On the legs)
PROP 65 WARNING:
This product
contains the chemical known to the
State of California to cause cancer
and birth defects or other reproductive
harm.
!
Instruction sheet --
VTI
Flat panel TV cart with cabinet
Model number: 10400
Congratulations for having chosen this excellent
VTI
product.
To assure your complete satisfaction, this product is warranted against defect in manufacture for one year after the
purchase date. Any parts requiring replacement during the 1--year period, under normal use and service, as a result
of defective workmanship, will be replaced by
VTI
or by an authorized
VTI
dealer, without cost, except for transportation
charges. All unit should be returnd in original packing to guarantee safe transport.
VTI
is not responsible for damage in
shipment.
If you have any questions regarding the assembly of your table, please call the
VTI
helpline at (626)333-6638.
Manufacturing, Inc.
V T I
Parts list
Qty. Description
1 Top shelf with decal
1 Middle shelf
1 Bottom shelf
2 Side panel for cabinet
1 Rear panel for cabinet
1 Left door assembly
1 Right door assembly
2 Leg (Labeled "X")
2 Leg (Labeled "O")
2 L-Handle rail
2 R-Handle rail
2 Handle shelf
2 Handle bar
Qty. Description
2 Handle support bar
2 Upper pole
2 Lower pole
2 Horizontal mount
2 Vertical mount
2 Caster with brake
2 Caster without brake
1 Power cord
1 Electrical bracket
3 Set Screw and serrated nut (E)
25
Set Square head bolt, washer and hex nut (I)
8 Set Hex head screw & washer for fixing handle shelf (J)
2 Security screw for upper horizontal mount (G)
2 Screw for lower horizontal mount (H)
2 Set Screw for fixing the support pole (M)
12 Set Hex head screw & washer for the caster (F)
8 Set Hex head screw & washer for the handle (K)
8 Philip head screw for the handles shelf (L)
25 Set Philip head screw for the door & side panel (N)
L-Ha
ndle r
ail
Hand
le bar
Hand
le sup
port b
ar
Handle shelf section assembly part
Shel
f
R-Ha
ndle r
ail
Horizontal mount
Lower pole
Upper pole
Vertical mount