120
121
Voicemail settings
[Telephone service provider]
Set speed dial voicemail number
This feature lets you save your voicemail
number for quick access when you
press and hold the
1
key.
To set your voicemail number:
1. Press
MENU/SELECT
when the phone
is not in use.
2. Press
q
CID
or
p
to scroll
to
Settings
, and then press
MENU/SELECT
.
3. Press
q
CID
or
p
to highlight
Voicemail #
, then press
MENU/SELECT
.
4. Use the dialing keys to enter the
voicemail access number (up to 30
digits) provided by your telephone
service provider.
• Press
q
CID
or
p
to move the
cursor to the left or right.
• Press
VOICE/MUTE/DELETE
on the
handset to erase a digit.
• Press and hold
VOICE/MUTE/DELETE
on the
handset to erase all digits.
• Press and hold
REDIAL/PAUSE
to
enter a three-second dialing pause
(a
P
appears).
5. Press
MENU/SELECT
to confirm.
Voicemail (visual message waiting)
indicator
If you subscribe to a voicemail service
offered by your telephone service
provider,
New voicemail
and the
icon appear on the handset and
telephone base screen when you have
new voicemail messages. Contact your
service provider for more information
and assistance about using your voicemail
service.
NOTE
• This feature does not indicate new
messages recorded on your phone’s
built-in answering system.
Clear voicemail indicator/indication
Use this feature when the telephone
indicates there is new voicemail but
there is none. For example, when you
have accessed your voicemail while
away from home. This feature only turns
off the displayed
New voicemail
and
the
icon; it does not delete your
voicemail messages. As long as you
have new voicemail messages, your
telephone service provider continues to
send the signal to turn on the indicator.
To manually turn off the new voicemail
indicator:
1. Press
MENU/SELECT
when the
phone is not in use.
2. Press
q
CID
or
p
to scroll
to
Settings
, and then press
MENU/SELECT
.
3. Press
q
CID
or
p
to highlight
Clr voicemail
, then press
MENU/SELECT
to turn the voicemail
indicator off.
NOTE
• Your telephone service provider
voicemail might alert you to new
messages with a stutter (broken) dial
tone. Contact your telephone service
provider for more details.
Add and register handset
When your handset is deregistered
from the telephone base, follow the
steps below to register it back to the
telephone base.
1. Before you begin registration,
make sure the handset is out of the
telephone base or charger and
shows
To register HS...
and
... see
manual.
2. Put the handset you wish to register
on the telephone base cradle.
3. The telephone base shows
Registering... Please wait
, and the
handset then shows
Registering...
.
If the registration is successful, the
handset screen displays
Registered
and beeps. The handset is now
registered with the telephone base.
If registration fails, the system will
automatically try to register again. If
registration fails after the third try,
Registration failed
appears on the
handset screen. The handset shows
To
register HS...
and
...see manual
, and the
telephone base returns to idle mode.
This may take up to five minutes to
occur. Please start again from Step 1.
NOTE
• If your handset is new, make sure
you charge it before attempting
registration.
