What’s in the box
Press
VIEW
to switch between the image of baby units
and
.
Press
VIEW
Change different views -
View
Change different views -
Patrol
Press
PATROL
to alternately view the image from baby units
and
every 10 seconds.
10s
Change different views -
Split
Press
SPLIT
to view the images from all baby units at once.
Dim mode
With dim mode preset to on, your parent unit display will dim after 10 minutes of inactivity to conserve energy.
10 min inactivity
Press any buttons
Once you power on your baby monitor, your parent unit displays image from baby unit
, and the
LINK
LED
light turns on.
The
ON/OFF
LED light of baby unit
turns on. As baby unit
is not being viewed, its
ON/OFF
LED light flashes.
Status check
Connect and power on -
Baby unit
Install the battery
Connect and power on -
Parent unit
CAUTION
• The default volume of your parent unit
is level 4. If you experience high-pitched
screeching noise from your baby monitor
while positioning:
- Make sure your baby unit and parent unit
are more than 1 meter (3 feet) apart, OR
- Turn down the volume of your parent unit.
＜
1m (3ft)
＞
1m (3ft)
>
1m (3ft)
<
1m (3ft)
VM5271-2 baby monitor system
Baby’s room
Living room
Go to
www.vtechphones.com
to register your product for
enhanced warranty support
and latest VTech product news.
VM5271-2
Quick start guide
2s
>
1m (3ft)
CAUTION
• This baby monitoring system includes a special lens which is capable of optical zoom and requires
delicate treatment. Please avoid disassembling, dropping, or any other rough handling.
THIS SIDE UP