11
Operate
PHONE mode
Operate with traditional corded phone (for VH6221 only)
To make a call:
1. Lift the corded handset to take the line at your
corded phone.
2. Press the
ON/OFF
button
on the headset.
• When you hear a clear dial tone at the headset
earpiece, you are now ready to dial a call.
• If the dial tone is unclear or you do not hear a
dial tone, slide the Audio Adjustment Switch at
the bottom of the headset base between
A
and
F
, until the dial tone is clear.
The default setting of the Audio Adjustment Switch is
A
.
3. Dial the telephone number using dialing keys on the corded phone.
Notes
• The audio adjustment setting is dependent on
- the types of deskphones to which the headset base is connected; and
- the interference caused by other DECT systems operating in the same environment.
• The headset supports hot swapping, in which the current call on the headset will
remain connected if you replace the battery within five minutes.
To answer a call:
1. Lift the corded handset to take the line at your corded phone.
2. Press the
ON/OFF
button
on the headset to answer an incoming call.
You hear the caller through the headset earpiece.
To end a call:
1. Press
the
ON/OFF
button
on the headset to leave the phone
conversation at the headset.
2. Place the corded handset back to the corded phone to end the call.
Operate with traditional corded phone via Lifter (for VH6221 only)
For calls operation with a traditional corded phone via Lifter, see
Operate with Lifter
.