VTech VH6220 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 54

VTech VH6220 Скачать руководство пользователя страница 12

5

Getting started

Connection methods

Choose one of the following methods to connect your headset for
operation in either

PHONE

mode or

PC

mode.

PHONE mode

Option 1: Connect to IP phone via EHS

• You can connect the headset to an IP phone using the EHS

cable and headset audio cable provided. The headset acts as
a supplementary device that can join calls. Use the IP phone
connected to make or answer calls.

Option 2: Connect to traditional corded phone (for VH6221 only)

• You can connect the headset to a traditional corded phone

using the corded phone connection cable provided. You need to
physically lift the corded handset off the corded phone base cradle
before you can use the headset to join in the call.

Option 3: Connect to traditional corded phone with Lifter (for VH6221 only)

• You can connect the headset to a corded phone using the corded

phone connection cable and lifter provided (see

Connect the

Lifter

). The headset acts as a supplementary device that can join

calls. You can simply press

on the headset to use the connected

corded phone to make or answer calls.

PC mode

Option 4: Connect to a computer

• Connect the headset base to your PC with the USB cable provided.

You can make and receive VoIP calls through Skype or Skype for
Business, using the software application.

Note

• The cords have colored labels that guide you to plug them into the correct headset

base jacks. The back of the headset base has color-coded dots and the names of the
jacks above them that correspond to the colored labels on the cords.

«
...
10
11
12
13
14
...
»

Содержание VH6220























































Отзывы:

Нет отзывов