13
LED on the controller
is lit, but the wireless
controller does not
seem connected.
Console is
connecting to a
different wireless
controller.
1. Press & hold the console's Power
Button for 10sec to turn the console
off.
2. Turn all wireless controllers OFF.
3. Press the console’s Power Button
to turn the console ON. Move the
controller’s Player Selector switch
to Player 1.
4. The indicator lights on the console
and controller should both be on,
indicating that they are connected.
5. If the problem persists, there may
be some interference in the radio
frequency signal. Be sure there
are no obstacles blocking the
signal between the console and
controller.
If your
InnoTV™
does not respond to an inserted cartridge, please
carefully try the following:
• Turn off the
InnoTV™
Console and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based
window cleaner to gently clean the contact area of the cartridge slot.
• If necessary, dry the clean contact areas with a soft, lint-free cloth.
• Make sure that all parts are completely dry before restoring electricity.
Static electricity may cause the
InnoTV™
to malfunction. In some cases,
the game play score stored in the console memory may be lost. In
cases where the
InnoTV™
has malfunctioned due to static electricity,
disconnect the power by unplugging the Power Adaptor jack from the
back of the console. Reconnect the Power Adaptor jack, and press
the Power button to turn the unit on again. If the static electricity
malfunction occurred during the file transferring process, reset the
console as described above and try again. Then reconnect the USB
cable and restart the file transfer process. For more information and
troubleshooting tips, visit www.vtechkids.com/tutorials/innotv.
