STEP 1 Check package contents
Make sure your phone’s packaging includes the following:
STEP 3 Battery installation
1. Align the two holes in the plug with the socket pins,
then snap the plug into place. Place the battery in the
compartment with the wires in the upper right corner.
2. Replace cover by sliding it upwards until it clicks into
place.
STEP 4 Charge the battery
1. Place the handset in the base unit/chargers.
2. Charge the battery for at least 16 hours before first use.
Quick Start Guide
i6765
STEP 2 Connect power to telephone base/
chargers
Plug the power adaptor into an electrical outlet not controlled
by a wall switch, and the connector into the power jack on
bottom of the telephone base/chargers.
NOTE:
• Use only the power adaptors supplied with your
VTech telephone.
STEP 5 Connect to phone line
Plug one end of the telephone line cord into the telephone line
jack at the bottom of the telephone base. Then plug the other
end of the cord into the wall telephone outlet.
Step 7 Set the clock
1. Press
TIME/SET
to listen to the current setting.
2. Press
TIME/SET
again to indicate changes needed.
3. Press
CHANGE
to change the day, hour, minute, or year.
4. When you hear the correct setting, press
TIME/SET
to
advance to the next setting.
Step 8 Record your outgoing announcement
1. Press
SETUP
, the system announces “
Announcement.
Press
PLAY or press RECORD. To continue setup, press
SETUP.
”
2. Press
REC/MEMO
and speak toward the
MIC
on the base
to record an announcement for up to 90 seconds.
3. Press
PLAY/STOP
/
(when finished recording).
Hanging up
Press
OFF
or place
the handset in its
base/chargers.
IMPORTANT!
If your product is not working properly:
1. Refer to your user’s manual.
2. Visit our website at www.vtechphones.com or
www. vtechcanada.com in Canada.
3. Call our customer service at 1-800-595-9511 or
1-800-267 7377 in Canada.
NOTE:
If you have caller ID service, the time will automatically
be updated with the first incoming call after your
program the year into the system.
NOTE:
For complete feature instructions, please refer to your
user’s manual.
AC power outlet
AC power outlet
Telephone outlet
STEP 6 Making and receiving calls
Making a call
• Press
TALK/FLASH
or
SPEAKER
and listen for dial
tone.
• Dial the phone number.
-OR-
• Dial the phone number.
• Press
TALK/FLASH
.
Receiving a call
Press
TALK/FLASH
,
SPEAKERPHONE
, or any dialing key
except
OFF
.
96-006098-010-000
issue 0
Base unit
Handsets (2)
Telephone
line cord
Batteries (2)
Belt clips (2)
Wall mount
bracket
Base power adaptor
Charger power adaptors
User’s manual
Chargers
Quick start
guide
