Using the WebUI
36
VSP715 Administrator and Provisioning Manual
System Pages
SIP Account Management
On the SIP Account Management pages, you can configure each account you have
ordered from your service provider.
The SIP Account settings are also available as parameters in the configuration file. See
“"sip_account" Module: SIP Account Settings” on page 95
.
General Account Settings
Click the link for each setting to see the matching configuration file parameter in
“Configuration File Parameter Guide” on page 94
. Default values and ranges are listed
there.
Setting
Description
Enable or disable the SIP account. Select to enable.
Enter the name that will appear on the VSP715 display
when account x is selected.
Enter the Display Name. The Display Name is the text
portion of the caller ID that is displayed for outgoing calls
using account x.
Enter the User identifier supplied by your service provider.
The User ID, also known as the Account ID, is a SIP URI
field used for SIP registration.
Note
: Do not enter the host name (e.g. "@sipservice.com").
The WebUI automatically adds the default host name.