Configuration File Parameter Guide
108
VSP610A Administrator and Provisioning Manual
MAC-specific configuration file settings
Setting:
sip_account.x.sip_session_timer_max
Description:
Sets the session timer maximum value (in seconds) for account x.
Values:
90–65535
Default:
1800
Setting:
sip_account.x.check_trusted_certificate
Description:
Enables or disables accepting only a trusted TLS certificate for account x.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
sip_account.use_first_trusted_certificate_for_all
Description:
Enables or disables accepting the first TLS certificate for all accounts.
Values:
0 (disabled), 1 (enabled)
Default:
0
Setting:
sip_account.x.preferred_ptime
Description:
Enter the packetization interval time in milliseconds.
Values:
10, 20, 30, 40, 50, 60
Default:
20
Setting:
sip_account.x.call_rejection_response_code
Description:
Select the response code for call rejection. This code applies to the
following call rejection cases:
User presses
for an incoming call (except when Call
Forward Busy is enabled)
DND is enabled
Phone rejects a second incoming call with Call Waiting disabled
Phone rejects an anonymous call with Anonymous Call Rejection
enabled
Phone rejects call when the maximum number of calls is reached
Values:
480, 486, 603
Default:
486
Setting:
sip_account.x.sip_account_enable
Description:
Enables account x to be used by the device.
Values:
0 (disabled), 1 (enabled)
Default:
0
Reject
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
