VTech ErisTerminal SIP Deskset VSP736, Руководство администратора и поставки

Страница: 90 / 219

Using the WebUI 90
Back to Contents
VSP736 Administrator and Provisioning Manual
LLDP-MED
802.1x
VID Enter the VLAN ID (vlan 5, for example).
Priority Select the VLAN priority that matches the Quality of
Service (QOS) settings that you have set for that VLAN ID.
Outbound SIP packets will be marked and sent according
to their priority. 7 is the highest priority.
Note : Configuring QOS settings for your router or switch is
a subject outside the scope of this document.
Enable PC Port VLAN Enable if the phone is part of a VLAN on your network.
Select to enable.
VID Enter the PC Port VLAN ID (vlan 5, for example).
Priority Select the VLAN priority that matches the Quality of
Service (QOS) settings that you have set for that VLAN ID.
Outbound SIP packets will be marked and sent according
to their priority. 7 is the highest priority.
Note : Configuring QOS settings for your router or switch is
a subject outside the scope of this document.
Setting Description
Enable LLDP-MED Enables or disables Link Layer Discovery Protocol for
Media Endpoint Devices (LLDP-MED). LLDP-MED is a
standards-based discovery protocol supported on some
network switches. It is required for auto-configuration with
VLAN settings.
Packet Interval (secs) Sets the LLDP-MED packet interval (in seconds).
Setting Description
Enable 802.1x Enables or disables the 802.1x authentication protocol.
This protocol allows the phone to attach itself to network
equipment that requires device authentication via 802.1x.
Identity Enter the 802.1x EAPOL identity.
MD5 Password Enter the 802.1x EAPOL MD5 password.
Setting Description