EN - 16
Handset battery charging
The battery must be fully charged before using
the cordless handset for the first time. The
battery charge light turns on when the cordless
handset is charging on the handset charger.
The battery is fully charged after 11 hours of
continuous charging. For best performance,
keep the cordless handset in the handset
charger when not in use.
Replacing a Cordless Handset Battery
The cordless handset battery is preinstalled. To
replace the cordless handset battery, follow the
steps below.
1. Use a narrow object to pry open the
handset cover, so that you unsnap the tabs
at the locations indicated below.
2. Place your thumb in the slot below the
battery, and lift the battery out of the
handset battery compartment.
3. Place the top of the battery in the handset
battery compartment so that the battery
connectors are aligned.
4. Push the bottom of the battery down into
the battery compartment.
5. To replace the handset cover, align all
the tabs on the handset cover against the
corresponding grooves on the handset, then
firmly push downward until all the tabs lock
in the grooves.
CAUTIONS
There may be a risk of explosion if a wrong
type of handset battery is used. Use only the
supplied rechargeable battery or replacement
battery.
To order a replacement, call
1-888-907-2007
.
Dispose of used batteries according to the
information in The RBRC® seal.
