41
Appendix
Expand your telephone system
Your telephone base can support up to five handsets. Each handset must be
registered to the telephone base before use. The handsets provided within your
product package are already registered as
HANDSET 1
and so forth. You can add
new handsets (
CS6609/CS6609-15/CS6609-16
, purchased separately) to your
telephone base. Additional handsets are assigned numbers in the sequential order
they are registered (up to
HANDSET 5
).
Add and register a handset
When first purchased, each expansion handset displays
To register HS
and
See manual
alternately. You may need to charge the handset before registering to
the telephone base. For more details on battery charging, see the table on page 4.
To register a handset:
Place the new/non-registered handset in the telephone base.
2. After about 10 seconds, the handset displays
Registering...
When the registration
process completes, the handset displays
Registered
and you hear a confirmation
tone. The registration process takes about 90 seconds to complete.
If the registration fails, the handset displays
Failed
and then
To register HS
and
See manual
alternately. Remove the handset from the telephone base and place it
back in to start the registration process again.
You cannot register a handset if any other system handset is in use.
Only one handset can register to the telephone base at a time.
1.
•
•
Do not place the handset
in the charger.
41
Appendix
